Menu
Cart 0

Slate Wall Tile

Daltile

  • 455

PRODUCTS SOLD BY

Wood: SF
Floor/Wall Tile: SF
Tile Trim: Piece
Mosaic: Piece

*Product prices are based on the SF or PC. The price you see is not a box price. Please enter the unit of measure for the product you need.
Example: Tile is not by the piece unless its trim or mosaic. So, if you need 12x24 tile enter the SF you need not the number of pcs.


Shade Variation: Medium (V2) to Random (V4)
Tile Thickness: 1/32" - 1/8"
Recommended Grout Width: 1/16"
Applications:
Residential Light Commercial Commercial Commercial Exteriors
Walls/Backsplashes X X X X
Commercial Note: Suitable for covered exterior walls in freezing and non-freezing climates when proper installation methods are followed.
Residential Note: Suitable for covered exterior walls in freezing and non-freezing climates when proper installation methods are followed.
Notes:
  • These stones may contain holes, voids, lines of separation and structural flaws. It is standard practice to repair these stones by filling them or reinforcing them.
  • Copper, Silver and Black - Can be used in interior wet areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.
  • Autumn Mist, Indian Multicolor and California Gold - Not recommended for wet areas.
  • A sealer is recommended.
  • Autumn Mist, Indian Multicolor and California Gold - These stones contain deposits of minerals and iron that may react to moisture. Stone bleeding or rusting is a common example of this. These stones should not be used in installations where they would be exposed to standing, run off water or too much humidity. A sealer is strongly recommended but will not prevent chemical reaction from happening. Please contact your sealer manufacturer for information about products that can protect the stone from moisture exposure.
  • Installation Recommendations:

    Preparation
    - Important to make sure the surface on which the SlimLite Slate and Quartzite is applied has been cleaned of any dirt, dust, grease or any other substance that may hinder the effectiveness of the adhesive.

    Adhesives
    - The recommended and most durable adhesive for installing SlimLite Slate and Quartzite is any adhesive with a polyurethane component.
    - The following have also been used and shown to be effective: premixed grout and tile adhesive, epoxy, silicone, thick latex type tile adhesive, or any polyurethane wood glues.
    - Check the properties of any adhesive used to be certain the conditions that the SlimLite Slate and Quartzite is installed in are covered under the adhesive's guidelines.

    Cutting, Grouting and Sealing
    - SlimLite Slate and Quartzite can be easily cut into various shapes using scissors, tin snips, metal shears, a wet saw or table saw.
    - When installing SlimLite Slate and Quartzite, you have the option of using grout joints or butting the pieces against each other. Due to the minimal thickness of the product, it is best if a minimal grout joint is used. Tests have show nthat the most effective grout joint used is a water-based epoxy grout.

We Also Recommend